Fitted wardrobes
For gaps between walls, alcoves and corners. Floor to ceiling and a precise fit, even when the walls aren't square.
Ideal for alcoves, ends of corridors and older built-in cupboards.
Made-to-measure wardrobes and walk-in wardrobes · Benahavís
A made-to-measure wardrobe in La Heredia is decided less by the colour of the doors than by what goes inside. This page walks through the decisions about the interior: when a drawer works harder than a shelf, how to separate small items from large ones, and what the difference is between the outside measurement and the usable space. By the end you will know what information to gather so that the configurator can prepare your design and the team can send you a guide estimate.
Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.
Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.
01 — Solutions in La Heredia
For gaps between walls, alcoves and corners. Floor to ceiling and a precise fit, even when the walls aren't square.
Ideal for alcoves, ends of corridors and older built-in cupboards.
Complete wardrobes with doors that need no room to open. With mirror, glass or other finishes.
Ideal if the bed is close by or you have less than 1 m clear in front.
Open or closed, straight, L-shaped or U-shaped. Laid out around what you store, not around a standard module.
Ideal from around 1.5 m wide.
02 — In La Heredia
Suppose you are planning a project in La Heredia and need to fit T-shirts, underwear, scarves, bed linen, a couple of bags and a box of documents into the same wardrobe. None of these things needs the same kind of support, and that is where the planning begins.
A drawer works best when what you store is small, soft or easily jumbled: socks, underwear, belts. You can see everything from above and take things out without moving anything. A shelf suits things that stack in firm piles, such as jumpers and towels, and things that will not fit in a drawer, such as bags. A hanging rail takes care of the rest: clothes that crease if folded.
The trade-off comes down to centimetres. A drawer with runners uses up a few centimetres of height and width compared with a shelf of the same size, and it costs more. A shelf, on the other hand, means stacking and moving what is on top to reach what is underneath. To decide, sort what you store into three piles (small, stackable, hanging) and let the size set the module in La Heredia. Drawers at waist height, shelves above.
Tell us about your space
In La Heredia, when you measure a wall recess, you get the outside measurement: the width between the walls. What you can actually use is less. The sides of the units, the backs, the drawer runners and the thickness of the shelves each take centimetres off on either side.
A practical rule: in a wardrobe built from 18 mm board, each column loses about 3.6 centimetres of usable width from the two sides alone. If the wardrobe has four columns, the total adds up to something noticeable. Drawers take a little more, because of the side runners.
That is why it pays to ask for the internal width of each column, not just the overall width. A drawer for T-shirts should come out at around 40 to 60 centimetres of internal width; beyond that, the load starts to flex the base. In La Heredia, as in any other project, giving the measurement of the recess is the first step and working out the usable space is the second.

Latest work by SI, ARMARIO
@si.armario
Made-to-measure wardrobes and walk-in wardrobes
Latest posts
Height is the dimension people forget most. A drawer for underwear needs about 12 centimetres; one for folded T-shirts, between 18 and 22; one for jumpers, up to 30. If every drawer is the same height, height is wasted.
A sensible layout in a two-metre column: two shallow, wide drawers at the top for everyday items; two medium ones below; and one deep drawer at the base for bulkier things. Height-adjustable shelves are left for whatever does not go in a drawer.
Drawers wider than 70 centimetres need reinforced runners, and integrated handles make cleaning simpler. For this kind of interior, the wardrobe storage page brings together the usual options.
Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.
A drawer and a door do not always get along. With hinged doors in front, a drawer in the central column will not open fully until the door is moved out of the way. In a fitted wardrobe with sliding doors, the doors always hide part of the drawers.
Two common solutions: put the drawers in the area behind a door that opens fully, or leave columns of drawers without a door, as an open block. An open front is easier to keep tidy, although dust shows more.
If opening space is a concern, the team reviews the design against the type of door before giving the go-ahead. With sliding doors, for example, it makes sense to put the drawers in the central section and the hanging rails at the sides.
If you already have a plan of the property, or a sketch of the renovation, it works as a starting point. Before the measuring visit it already provides almost everything important and saves a round of questions. What helps most is the floor plan with dimensions and the section showing the clear height.
Upload the plan or a clear photo, and mark on it where the wardrobe will go. If the plan is old, say so on the form, because the project dimensions and the real ones often differ.
Without a plan, a freehand sketch with three dimensions will do: width, height and depth. Add where the windows, doors and light points are. With that information, the configurator generates a design that is fine-tuned at the measuring visit.
The best preparation for a wardrobe with drawers is to empty the current one and sort everything. Spread it all out on the bed and form piles: what gets folded, what gets hung, what goes in a box and what you no longer use. Count each pile and measure its stacked height.
That information translates directly into modules. If your stacked T-shirts measure 25 centimetres, you need a drawer of that height, not one of 15. If you have twenty pairs of shoes, work out the width they take up in a row and decide whether they fit on shelves or in a shoe rack.
Think about the future, not just today. Keep ten to fifteen per cent of the space free. In a project in La Heredia, as in any other, a wardrobe that starts out full soon becomes too small.

A drawer costs more than a shelf: it has a front, a box, runners and sometimes soft-close. That is why the internal layout of a wardrobe in La Heredia matters as much as its dimensions. A wardrobe with ten drawers and another with open shelves can be the same size and very different in price.
The type of door, the hardware for the rails and extras such as pull-out shoe racks also play a part. There is no single figure; what you can do is try out variants in the configurator and compare. The factors behind the calculation are on prices.
Once the team receives your configuration with measurements, it replies with a guide estimate within the following 24 hours. The measuring visit costs €50 if the wardrobe is not ordered and is free of charge if you go ahead. Once the design is approved, manufacturing takes 2–3 weeks on average.
La Heredia appears as a development in the municipality of Benahavís in the municipal water company's annual report. If your project is in La Heredia, you state this when sending the request, and the team confirms it before arranging the measuring visit. For any building-works permits, the competent body is the Ayuntamiento de Benahavís.
At the visit, the floor level, the squareness of the walls and the position of the electrical sockets are checked. We verify that the drawers open with room to spare and the finishes are closed off.
If you live in a community of owners in Benahavís, let us know for delivery day. The steps of the order, from configuration to delivery, are in how we work.
Quote
With your name, a phone number and a photo of the space, we can get started.
What happens next
Frequently asked questions
If what you store is small or gets jumbled, such as underwear, socks or belts. In a drawer you see everything from above; on a shelf you would have to stack and move things.
The outside measurement is that of the recess between the walls. The usable space is smaller, because the sides, backs and drawer runners take centimetres off inside each column.
Yes. In La Heredia, as anywhere, a plan with dimensions or the section showing the clear height is enough to get started, although the measuring visit confirms the real figures before manufacturing.
It depends on the height and on what you store. In about two metres, five or six drawers of different heights fit, leaving a free shelf at the top for things you do not use every day.
Give the address on the form or by WhatsApp. That address is then used to set the timescales and the measuring appointment.
Tell us what you need to store and how much space you have. Put together a layout with drawers and shelves and get a ballpark estimate, so you can decide without any pressure.